D-Link DI-1750 Reference Manual page 68

User can configure the following items on the WAN sub-interface with Frame Relay encapsulation:
♦ DLCI or Frame Relay address mapping differ with original WAN interface
♦ IP address in different networks with the original WAN interface
1. Define Frame Relay Subinterfaces
To configure subinterfaces on a Frame Relay network, perform the following command in global
configuration mode:
Command
interface type number
encapsulation frame-relay
interface
number.subinterface-number
{multipoint | point-to-point}
[DEFAULT@Router /config/]#interface
Key Word:
U(undo) D(default)
(00)FastEthernet
(01)Ethernet
(02)Serial
......
Please Input the code of command to be excute(0-10): 2
Please input a interface name:s1/0 （input the interface name）
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(11)encapsulation
(12)english
......
Please Input the code of command to be excute(0-32): 11
Key Word:
U(undo) D(default)
(00)frame-relay
(01)hdlc
......
Please Input the code of command to be excute(0-4): 0
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(17)history
(18)interface
......
Please Input the code of command to be excute(0-32): 18
Key Word:
U(undo) D(default)
(00)FastEthernet
(01)Ethernet
(02)Serial
......
Please Input the code of command to be excute(0-10): 2
Please input a interface name:s1/0.1 （input the sub-interface name）
(00)multipoint
(01)point-to-point
Model Name
Specify an interface.
Configure Frame Relay encapsulation on the serial interface.
type
Specify a subinterface.
Q(quit)
FastEthernet interface
Ethernet interface
Serial interface
Set encapsulation type for an interface
help message in English
Q(quit)
Frame Relay Protocol
HDLC Protocol
look up history
interface configuration
Q(quit)
FastEthernet interface
Ethernet interface
Serial interface
-- multi-point sub-interface
-- point to point sub-interface
- 66 -
Purpose