D-Link DI-1750 Reference Manual page 490

dlsw icannotreach saps sap [sap...]
dlsw mac-addr mac-addr
dlsw bridge-group group-number [sap-priority
list-number]
dlsw udp-disable
sap-priority-list
[high|medium|normal |low] [dmac mac-address]
[smac mac-address] [dsap sap-value] [ssap
sap-value]
14.1.2 How to use the function of showing DLSw
Use Commands below in management state and local configuration state:
show dlsw capabilities [ ip-address ip-address |
local]
show dlsw
address | sap-value value | circuit id]
show dlsw peers [ip-address ip-address ]
show dlsw reachability [[local | remote] |
[mac-address address]
14.1.3 How to use the DLSw's Debug Function
User can use DLSw deug function to monitor the DLSw operation status when using the DLSw function
on a router.
user can use the following commands in configuration mode:
Debug dlsw error
debug dlsw state [tcp ip-address | circuit
circuit-id | explorer mac-address]
debug dlsw event [detail]
Debug dlsw flow-control
Debug dlsw packet
14.1.4 How to use the DLSw Management Function
User can use the DLSw management function to clear DLSw circuit and statistics when using the DLSw
function on a router.
Model Name
list-number
Command
[detail] [mac-address
circuits
Command
This command is used to configure the unreachable local
SAP. The no argument is used to cancel the
configuration.
This command is used to configure the static MAC
address. The no argument is used to cancel the
configuration. This command is related to both the local
buffer and the remote buffer.
This command is used to configure the DLSw bridge
group. The no argument is used to cancel the
configuration.
This command is used to shut down the UDP sending of
The no argument is used to cancel the
dlsw.
configuration.
This command is used to configure the priority base on
MAC/SAP. The no argument is used to cancel the
configuration.
User can have more understanding about various status
which happen during the DLSW capability exchange by
displaying the information of DLSW capability.。
User will know the current status information of all the
circuit by displaying DLSW virtue circuit.
By implement this command, it'll display the various
information about remote DLSW.
By implement this command, it'll display the information
of DLSW buffer, including the local buffer and remote
buffer.
Display debug DLSw error.
Display debug information of DLSw internal status.
Display debug DLSw events
Display the debug information of DLSw flow control.
Display DLSw packet.
- 488 -
Function
Function