D-Link DI-1750 Reference Manual page 433

Model Name
(12)help Description of the interactive help system
(13)history look up history
(14)interface interface configuration
(15)ip IP configuration commands
(16)mtu Set the interface MTU
......
Please Input the code of command to be excute(0-28): 15（select command ip）
Key Word:
U(undo) D(default) Q(quit)
(00)access-group Specify access control for packets
(01)address IP address
(02)beigrp Enhanced Interior Gateway Routing Protocol
......
Please Input the code of command to be excute(0-18): 1（select address）
Key Word:
Q(quit)
(00)A.B.C.D IP address
(01)negotiated IP address negotiated over PPP or via DHCP
Please Input the code of command to be excute(0-1): 0
Please input a IP Address:192.168.19.80
Key Word:
Q(quit)
(00)A.B.C.D IP netmask
Please Input the code of command to be excute(0-0): 0
Please input a IP Address:255.255.255.0
Key Word:
Q(quit)
(00)secondary Make this IP address a secondary address
(01)<cr>
Please Input the code of command to be excute(0-1): 1
Will you excute it? (Y/N):y
Configuring dialer map: dialer map next-hop-address [ name hostname ] [ broadcast ] dialer-string
Key Word:
Q(quit)
(00)bandwidth Set the interface bandwidth
(01)chinese help message in Chinese
(02)chmem Change memory of system
(03)clear_drv clear interface statistic counter
(04)crypto Encryption module
(05)default restore default configuration
(06)delay Set the interface delay
(07)description Set the interface description
(08)dialer Dial-on-demand routing (DDR) commands
(09)dialer-group Assign interface to dialer-list
......
Please Input the code of command to be excute(0-28): 8（select command dialer）
Key Word:
U(undo) D(default) Q(quit)
(00)called Dialer called string
.......
(07)map Define multiple dial-on-demand numbers
(08)remote-name Specify remote name
(09)rotor Set outbound rotor order
(10)string Set default telephone number
(11)wait-for-carrier-time Set the router wait for carrier time
Please Input the code of command to be excute(0-11): 7（select command map）
- 431 -