D-Link DI-1750 Reference Manual page 516

(05)force-local-chap Force a CHAP challenge to be instigated locally
(06)help Description of the interactive help system
(07)hotkey ctrl+\ :print system information , ctrl+] :reboot
(08)initiate-to Initiate tunnel to remote peer
(09)interface interface configuration
(10)l2tp L2TP specific commands
(11)lcp-renegotiation force LCP negotiate locally
(12)local-name Local name used for group authentication
(13)pptp PPTP specific commands
(14)protocol Tunneling protocol to be used
(16)request-dialin VPDN request-dialin group configuration
(17)router routing protocol configuration
(19)set_e1_threshold SET E1 THRESHOLD
(20)show show configuration and status
(21)terminate-from Terminate tunnel from remote peer
(22)virtual-template Virtual template to clone from
(23)vlan Vlan commands
Please Input the code of command to be execute(0-23): 11
Current Status:vpdn Current Directory: config
Key Word:
U(undo) Q(quit)
(00)<cr>
Please Input the code of command to be execute(0-0): 0
15.1.11 Clone configured source interface on LNS workgroup
After establishing session, LNS must connect with CLIENT through certain virtual interface, virtual
interface number can be created virtual module interface, if this interface is not created, then creating.
Relative command as below:
virtual-template virtual-temp-num
virtual-template(undo) virtual-temp-num
The example below creates a VPDN group and sets the VPDN group as NS and relates it to the virtual
interface 1.
First enter the vpdn-group 1 with command "vpdn-group 1"(see the example of command vpdn-group)
then configure as NS with command "accept-dialin" (see the example of command accept-dialin) . Then,
configure the "virtual-template 1" just as below.
Current Status:vpdn Current Directory: config
Key Word:
Q(quit)
(00)accept_dialin VPDN accept-dialin group configuration
(01)chmem Change memory of system
(02)controller controller configuration
(03)domain Initiate a tunnel based on domain name
(04)exit exit / quit
(05)force-local-chap Force a CHAP challenge to be instigated locally
(06)help Description of the interactive help system
(07)hotkey ctrl+\ :print system information , ctrl+] :reboot
(08)initiate-to Initiate tunnel to remote peer
(09)interface interface configuration
(10)l2tp L2TP specific commands
(11)lcp-renegotiation force LCP negotiate locally
(12)local-name Local name used for group authentication
(13)pptp PPTP specific commands
Model Name
Command
clone configured source interface on LNS workgroup.
Cancle source interface on LNS workgroup.
- 514 -
Function