D-Link DI-1750 Reference Manual page 344

Please Input the code of command to be excute(0-4): 3
(00)WORD
(01)default
Please Input the code of command to be excute(0-1): 0
Please input a string:dlink (input authentication list)
(00)group
(01)group-restrict
(02)local
......
Please Input the code of command to be excute(0-6): 2
......
(03)radius
(04)tacacs+
(05)<cr>
Please Input the code of command to be excute(0-5): 3
......
(03)tacacs+
(04)<cr>
Please Input the code of command to be excute(0-4): 4
Will you excute it? (Y/N):y
[DEFAULT@Router /config/]#interface
(00)FastEthernet
(01)Serial
......
Please Input the code of command to be excute(0-9): 1
Please input a interface name:s0/1 （input the port name）
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(25)physical-layer
(26)ppp
......
Please Input the code of command to be excute(0-34): 26
Key Word:
U(undo) D(default)
(00)authentication
(01)authorization
(02)callback
......
Please Input the code of command to be excute(0-9): 0
(00)chap
(01)ms-chap
(02)pap
Please Input the code of command to be excute(0-2): 0
(00)WORD
(01)callin
......
Please Input the code of command to be excute(0-5): 0
Please input a string:dlink （input authentication list name）
Will you excute it? (Y/N):y
With aaa authentication ppp command, you can create one or more lists of authentication methods
that are used when a user begins to run PPP. These lists are applied using the ppp authentication
line configuration command. To create a default list, use the default parameter followed by the
methods you want used in default situations. For example, to specify the local username database as
the default method for user authentication, enter the following:
aaa (default) authentication ppp local
Model Name
Named authentication list
The default authentication list.
Use Server-group
If user has specified a server,this group will not be used
Use local username authentication
Use all radius server for authentication
Use all tacacs+ server for authentication
Use all tacacs+ server for authentication
FastEthernet interface
Serial interface
Configure physical layer parameters
Point-to-point protocol
Q(quit)
Set PPP link authentication method
Set PPP network authorization method
Set CALLBACK parameters
Challenge Handshake Authentication Protocol (CHAP)
Microsoft Challenge Handshake Authentication Protocol(MS-CHAP)
Password Authentication Protocol (PAP)
Use an authentication list with this name
Authenticate remote on incoming call only
- 342 -