D-Link DI-1750 Reference Manual page 295

Key Word:
U(undo) Q(quit)
(00)as-path
(01)community
(02)ip
(03)length
(04)metric
(05)tag
Please Input the code of command to be execute(0-5): 03
Current Status:route_map
Key Word:
Q(quit)
(00)<0-4294967295> Minimum packet length
Please Input the code of command to be execute(0-0): 00
Please input a digital number:
Now,input min_length max_length
Step 3: set gateway or outgoing interface
Current Status:route_map
Key Word:
......
(09)set
Please Input the code of command to be execute(0-11): 09
(08)ip
Please Input the code of command to be execute(0-13): 08
(00)default
(01)next-hop
Now, choose 00 to set default gateway or 01 to set outgoing gateway.
Or
Current Status:route_map
Key Word:
Q(quit)
(09)set
Please Input the code of command to be execute(0-11): 09
(06)default
Please Input the code of command to be execute(0-13): 06
Current Status:route_map
Key Word:
Q(quit)
(00)interface
Please Input the code of command to be execute(0-0):00
Current Status:route_map
Key Word:
Q(quit)
(00)interface-name
Please Input the code of command to be execute(0-0): 00
Current Status:route_map
Key Word:
Q(quit)
(00)FastEthernet
(01)Serial
(02)Async
Please Input the code of command to be execute(0-2):
Now ,input the port name
6.15.5 apply route-map on interface
To enable PBR on interface，following the step bellow:
Match as-path list
Match community list
Match ip attribute
Match packet length
Match metric attribute
Match tag attribute
Current Directory: config
Current Directory: config
Set attribute of routes
IP attribute
Set default information
Nexthop attribute
Current Directory: config
Set attribute of routes
Set default information
Current Directory: config
Default output interface
Current Directory: config
Current Directory: config
FastEthernet interface
Serial interface
Asynchronous interface
Model Name
- 293 -