D-Link DI-1750 Reference Manual page 169

Step 1：
Input ip command，it will list all arguments:
(00)access-list Named access-list
......
(13)nat NAT configuration commands
......
Please Input the code of command to be excute(0-20): 13
Input 13, select nat option，prompt is as below:
(00)inside Inside address translation
(01)log NAT Logging
(02)outside Outside address translation
(03)pool Define pool of addresses
(04)translation NAT translation entry configuration
Please Input the code of command to be excute(0-4): 2
Input 2，select outside option，prompt is as below:
(00)source Source address translation
Please Input the code of command to be excute(0-0): 0
Input 0，select source option，prompt is as below:
(00)list Specify access list describing global addresses
(01)static Specify static global->local mapping
Please Input the code of command to be excute(0-1): 1
Input 1，select static option，prompt is as below:
(00)A.B.C.D Outside global IP address
(01)network Subnet translation
(02)tcp Transmission Control Protocol
(03)udp User Datagram Protocol
Please Input the code of command to be excute(0-3): 0
Input 0，select A.B.C.D option，prompt is as below:
Please input a IP Address:
Input gobal-ip, prompt is as below:
(00)A.B.C.D Outside local IP address
Please Input the code of command to be excute(0-0): 0
Input 0，select A.B.C.D option，prompt is as below:
Please input a IP Address:
Input local-ip, it will establish static translation between an outside local address and an outside global address.
Step 2：
Input interface command, prompt is as below:
(00)FastEthernet FastEthernet interface
(01)Ethernet Ethernet interface
(02)Serial Serial interface
......
Please Input the code of command to be excute(0-10):
Specify inside interface type and number.
Step 3：
Select 18 option in the prompt, it will list all arguments:
(00)access-group
......
(09)nat NAT interface commands
......
Please Input the code of command to be excute(0-18): 9
Input 9, select nat option, prompt is as below:
(00)inside Inside interface for address translation
(01)outside Outside interface for address translation
Please Input the code of command to be excute(0-1): 0
Model Name
Specify access control for packets
- 167 -