D-Link DI-1750 Reference Manual page 484

The first parameter and the second parameter are all default once recording time. But the unit of first
parameter is second, but the second is 0.1 sendond. The default once recording time is 15-second.
For an example:
record time 12 10
It indicates the default recording time is 12-second and 10 * 0.1 = 1 second, then the time 1 second will
take effect.
4. Configure the playing position of the file
After completing recording, you should set the record file to the specified position so that you can get
the sound. Then we will show you this process. Given a user has got a sound file named "user/1"
according to the upper steps, then he can set the file to the specified position and make it be the
sounde file used in ivr voice pattern. It will take the D-Link sound by default.
You can configure the file name of welcome word for card phone, the prompt sound of inputing user
name, the prompt sound of inputing password, the prompt sound of failing in authentication, the prompt
sound file name of starting dialing phone number, the prompt sound file name of failing in getting
through the call, the prompt sound file name of balance not enough. Please perform the following
configurations in ivr configure mode:
file play-start filename
file authen-user-start filename
file authen-key-start filename
file authen-failed filename
file dial-start filename
file dial-failed filename
file interrupt-start filename
13.1.5 Enable RADIUS authentication
If you enable one-dial mode, it won't enable single authentication to a special user, so it can only
execute uniform authenticating to all one-dial users.
You should also ensure the interconnection between RADIUS Server and RADIUS Client in network
layer, and ensure in the RADIUS Server you have configured the user list of all one-dial users. No
authentication is enabled by default.
Please perform the following configuration in global mode:
gw-authen-h323
The authentication function to two-dial user is fixed in the pattern and can't be changed.
13.1.6 Enable RADIUS costing
Although the authentication function is separated between one-dial user and two-dial user, the costing
function is the same. When you enable this function on a RADIUS Client, the system will evoke costing
to all one-dial and two-dial users and send the information to specified RADIUS Server for costing.
RADIUS costing is disabled by default. Please perform the following configuration in global mode:
Command
Setting play-start filename of welcome word on card telephone.
Configure the prompt sound of inputing user name.
Configure the prompt sound of inputing password.
Configure the prompt sound file name of failing in
authentication.
Configure the prompt sound file name of starting dialing phone
number.
Configure the prompt file name of failing in putting through the
call.
Configure the prompt sound file name of balance no enough.
Command
Enable or disable one-dial authentication.
Model Name
Function
Function
- 482 -