D-Link DI-1750 Reference Manual page 226

2
input 2，Select beigrp option
Key Word:
Q(quit)
(00)interface Show BEIGRP interface
(01)neighbors Show BEIGRP neighbor
(02)topology Show BEIGRP Topology Table
(03)traffic BEIGRP Traffic Statistics
(04)protocols IP routing protocol process parameters and statistics
Please Input the code of command to be excute(0-4): 1
input 1，Select neighbors option
Key Word:
Q(quit)
(00)<1-65535> AS Number
(01)interface-name
(02)detail Show detail peer information
(03)<cr>
Please Input the code of command to be excute(0-3): 0
Note:
As-number indicates autonomous system number，If you specify this parameter ，it will only display neighbors of
this EIGRP course； interface indicates interface name ， If you specify this parameter ， it will only display EIGRP
neighbor on this interface； detail indicates display detailed neighbor information .here Select as-number is only an
example.
Please input a digital number:Please input a string:23
Note:
Please input according to prompt，here input 23 is only an example.
Key Word:
Q(quit)
(00)detail Show detail peer information
(01)<cr>
Please Input the code of command to be excute(0-1): 0
Note:
Please input according to prompt，here input detail is only an example.
Will you excute it? (Y/N):y
It will display information as below：
IP-BEIGRP neighbors for process 23
Address interface hold uptime srtt rto Q_cnt Seq
(sec) (10ms)(10ms)
Command
show ip beigrp
[as-number | all-link | summary |
active]
[DEFAULT@Router /enable/]#show
Key Word:
U(undo) D(default) Q(quit)
(00)alias alias for command
(01)arp ARP table
.......
(17)interface interface status and configuration
(18)ip IP information
(19)job Job parameters and statistics
(20)l2tp L2TP information
--More--
Model Name
display BEIGRP topology information
topology
- 224 -
Function