D-Link DI-1750 Reference Manual page 109

Q(quit)
(00)WORD
(01)default
Please Input the code of command to be excute(0-1):0
Please input a string:dlink (input username)
Key Word:
Q(quit)
(00)A.B.C.D
Please Input the code of command to be excute(0-0): 0
Please input a string:Please input a IP address:10.0.0.1 (input ip address)
Key Word:
Q(quit)
(00)<1 - 1024>
(01)<cr>
Please Input the code of command to be excute(0-1):0
Please input a string:10 (input Number of IP pool)
Key Word:
Q(quit)
(00)<cr>
Please Input the code of command to be excute(0-0):0
Will you excute it? (Y/N):y
[DEFAULT@Router /config/]#interface
(00)FastEthernet
(01)Serial
(02)Async
......
Please Input the code of command to be excute(0-9): 2
Please input a interface name:s0/1 （input the interface name）
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(26)physical-layer
(27)ppp
......
Please Input the code of command to be excute(0-35): 27
Key Word:
U(undo) D(default)
(00)default
(01)neighbor-route
Please Input the code of command to be excute(0-1): 0
(00)ip
Please Input the code of command to be excute(0-0): 0
(00)address
Please Input the code of command to be excute(0-0): 0
(00)A.B.C.D
(01)dhcp
(02)pool
Please Input the code of command to be excute(0-2):2
(00)WORD
Please Input the code of command to be excute(0-0): 0
Please input a string:D-link
Will you excute it? (Y/N):y
To define an IP address for a specified interface, use the following commands:
Command
ip local pool poolname
Model Name
Create named local address pool
Create default local address pool
Set first IP address and Number of IP addresses of pool
Number of IP addresses of pool
default is 1
FastEthernet interface
Serial interface
Asynchronous interface
Configure physical layer parameters
Point-to-point protocol
Q(quit)
Specify default parameters
Create neighbor route to peer if needed
Specify default IP parameters
Specify default IP address
Default IP address for remote end of this interface
Use DHCP proxy client to allocate a peer IP address
Use IP pool mechanism to allocate a peer IP address
Name of IP address local-pool
（input the ip pool name，the string "D-link" here is just for example）
Creates one or more local IP address pools.
- 107 -
Purpose