D-Link DI-1750 Reference Manual page 321

In global configure directory input ipCommand，prompt is as below:
(00)access-list
......
(09)forward-protocol
......
Please Input the code of command to be excute(0-25): 9
input 9，Select forward-protocol option ，prompt is as below:
(00)udp
Please Input the code of command to be excute(0-0): 0
input 0，Select udp option ，prompt is as below:
(00)<0-65535>
(01)biff
(02)bootpc
......
Please Input the code of command to be excute(0-27):
Select message port number.
7.3.11 Configure Stud multicast route
Use ip igmp helper-address and to ip pim-dm neighbor-filter configure Stud multicast route.
On the port connected with stud router and host:
Command
interface type number
ip igmp
destination-address
Step1：
input interface Command，prompt is as below:
(00)FastEthernet
(01)Ethernet
......
Please Input the code of command to be excute(0-10):
Select port type，prompt is as below:
Please input a interface name:
input port name.
Step2:
In the prompt select 17 option ，prompt is as below:
(00)access-group
......
(06)igmp
......
Please Input the code of command to be excute(0-21): 6
input 6，Select igmp option ,prompt is as below:
(00)helper-address
(01)immediate-leave
(02)join-group
......
Please Input the code of command to be excute(0-8): 0
input 0，Select helper-address option ，prompt is as below:
(00)FastEthernet
(01)Ethernet
(02)Serial
(03)Async
(04)Null
Named access-list
Controls forwarding of directed IP broadcasts
Packets to a specific UDP port
Port number
Biff (mail notification, comsat, 512)
Bootstrap Protocol (BOOTP) client (68)
Enter into port configuration.
Configure ip igmp helper-address and relay
helper-address
multicast messages to central router.
FastEthernet interface
Ethernet interface
Specify access control for packets
IGMP interface command
relay igmp packet
leave groups immediately without sending query
IGMP join multicast group
FastEthernet interface
Ethernet interface
Serial interface
Asynchronous interface
Null interface
Model Name
Purpose
- 319 -