D-Link DI-1750 Reference Manual page 514

Please Input a string: nac
Will you execute it? [Y]:y
15.1.8 Set remote LAC tunnel name connected with LNS
After receiving SCCRQ information, LNS will find VPDN group matching remote tunnel name with LAC
tunnel name, so LNS VPDN group can configure remote tunnel name which connect with LNS for
matching after receiving SCCRQ information. If a VPDN group doesn't configure remote tunnel name,
this group will be regarded as default VPDN group, when there is no other matching VPDN group, this
information will be adopted.
Terminate-from remote_lac_name
Terminate-from(undo) remote_lac_name
The example below creates a VPDN group and sets the VPDN group as NS. The name of the
responsive remote tunnel is lac.
First enter the vpdn-group 1 with command "vpdn-group 1"(see the example of command vpdn-group)
then configure as NS with command "accept-dialin" (see the example of command accept-dialin) . Then,
configure the "terninate-from nac" just as below.
Current Status:vpdn Current Directory: config
Key Word:
Q(quit)
(00)accept_dialin VPDN accept-dialin group configuration
(01)chmem Change memory of system
(02)controller controller configuration
(03)domain Initiate a tunnel based on domain name
(04)exit exit / quit
(05)force-local-chap Force a CHAP challenge to be instigated locally
(06)help Description of the interactive help system
(07)hotkey ctrl+\ :print system information , ctrl+] :reb
oot
(08)initiate-to Initiate tunnel to remote peer
(09)interface interface configuration
(10)l2tp L2TP specific commands
(11)lcp-renegotiation force LCP negotiate locally
(12)local-name Local name used for group authentication
(13)pptp PPTP specific commands
(14)protocol Tunneling protocol to be used
(16)request-dialin VPDN request-dialin group configuration
(17)router routing protocol configuration
(19)set_e1_threshold SET E1 THRESHOLD
(20)show show configuration and status
(21)terminate-from Terminate tunnel from remote peer
(22)virtual-template Virtual template to clone from
(23)vlan Vlan commands
Please Input the code of command to be execute(0-23): 21
Current Status:vpdn Current Directory: config
Key Word:
U(undo) Q(quit)
(00)STRING Remote Host Name
Please Input the code of command to be execute(0-0): 0
Please Input a string: nac
Model Name
Command
- 512 -
function
Set remote LAC tunnel name connected with LNS.
Cancle remote LAC tunnel name connected with LNS.