D-Link DI-1750 Reference Manual page 254

(00)help Help information of aspath regular expression
(01)WORD Name of AS-path access list
Please Input the code of command to be excute(0-1): 1
input 1，Select WORD option ，prompt is as below:
Please input a string:
input string ，then prompt is as below:
(00)deny Access list for denies
(01)permit Access list for permits
Please Input the code of command to be excute(0-1):
Select parameter ， and confirm itLINE value .
Step2：
input router Command，prompt is as below:
(00)beigrp Enable BEIGRP (compatible with eigrp)
(01)bgp Enable Border Gateway Protocol (BGP)
(02)ospf Enable Open Shortest Path First (OSPF)
(03)rip Enable Routing Information Protocol(RIP)
Please Input the code of command to be excute(0-3): 1
input 1，Select bgp option ，prompt is as below:
(00)<1-65535> Local anonymous system number
Please Input the code of command to be excute(0-0): 0
Select 0，prompt is as below:
Please input a digital number:Please input a string:
input autonomous-system value .
Step3：
In the prompt Select 12 option ，prompt is as below:
(00)A.B.C.D IP address of neighbor
Please Input the code of command to be excute(0-0): 0
input 0，Select A.B.C.D option ，then prompt 为：
Please input a IP Address:
input IP ，prompt is as below:
(00)default-originate
(01)description
(02)distribute-list Distribute list
(03)ebgp-multihop
(04)filter-list AS-path filter list
......
Please Input the code of command to be excute(0-17): 4
input 4，Select filter-list option ，prompt is as below:
(00)WORD Name of as-path filter list
Please Input the code of command to be excute(0-0): 0
input 0，Select WORD option ，prompt is as below:
Please input a string:
input string ，prompt is as below:
(00)in Filter incoming routes
(01)out Filter outgoing routes
Please Input the code of command to be excute(0-1):
Select parameter .
Use the global configuration command ip access-list and neighbor distribute-list command together
to apply the access list.
ip access-list standard access-list-name
router bgp autonomous-system
Model Name
Permit announcement of default route to neighbor
Description of the neighbor
Allow EBGP neighbor not directly connected
Command
Define an access list.
Enter the router configuration mode.
- 252 -
Purpose