D-Link DI-1750 Reference Manual page 396

(01)limit set queue max packets of a particular queue
Please Input the code of command to be excute(0-1): 1
Input 1, select <limit>option: (if you want to configure the customed list to send the byte numer, you can select the
0<byte-count>option)
Key Word:
Q(quit)
(00)<0-32767> Size in bytes
Please Input the code of command to be excute(0-0): 0
Input 0, select <0-32767>option, it will prompt to input the upper limit of the queue:
Please input a digital number:20
Input 20, it indicates that you have set 20 as the upper limit.
Key Word:
Q(quit)
(00)byte-count specify size in bytes of a particular queue
(01)<cr>
Please Input the code of command to be excute(0-1):1
Input 1
Will you excute it? (Y/N):y
You have completed configuring the upper limit of the queue list.
In the above example, if you input 0 and select<byte-count>, then it will continue to configure the customed list to
send byte number, the following prompt displayed:
Key Word:
Q(quit)
(00)<1-16777215> Size in bytes
Please Input the code of command to be excute(0-0): 0
Input 0 and select the <1-16777215>option:
Please input a digital number:16
Key Word:
Q(quit)
(00)<cr>
Please Input the code of command to be excute(0-0): 0
Will you excute it? (Y/N):y
To define the custom queueing lists, use one of the following commands in global configuration mode:
Command
queue-list list-number
protocol-type queue-number [keyword
key-value]
queue-list list-number config-interface
interface-type
queue-number
queue-list
list-number
queue-number
queue-list
list-number
protocol-type queue-number [keyword
key-value]
To establish a customed queue by the protocol medols, you can input :queue-list in the global
configuration directory
[DEFAULT@Router/config/]#queue-list
Key Word:
U(undo) D(default) Q(quit)
Model Name
Establishes queueing priorities based on the protocol
protocol
type.
Establishes custom queueing based on packets
entering from a given interface.
interface-number
Assigns a queue number for those packets that do not
default
match any other rule in the custom queue list. The
default value is 1.
protocol
Establish a customed queue by protocol models
- 394 -
Purpose