D-Link DI-1750 Reference Manual page 47

Q(quit)
......
(23)pdp
(24)physical-layer
......
Please Input the code of command to be excute(0-32): 23
Key Word:
U(undo) D(default)
(00)enable
Please Input the code of command to be excute(0-0): 0
Will you excute it? (Y/N):y
4.2.4 monitoring and managing CDP
In order to monitoring CDP, you can use the following commands in management mode:
show pdp traffic
show pdp neighbor [detail]
Example 1：
[DEFAULT@Router /enable/]#show
Key Word:
U(undo) D(default)
......
(27)memory
(28)pdp
......
Please Input the code of command to be excute(0-49): 28
Key Word:
Q(quit)
(00)neighbor
(01)traffic
Please Input the code of command to be excute(0-1): 1
Will you excute it? (Y/N):y
Example 2：
[DEFAULT@Router /enable/]#show
......
(27)memory
(28)pdp
......
Please Input the code of command to be excute(0-45): 28
(00)neighbor
(01)traffic
Please Input the code of command to be excute(0-1): 0
(00)detail
(01)<cr>
Please Input the code of command to be excute(0-1): 0
Will you excute it? (Y/N):y
pdp configuration commands
Configure physical layer parameters
Q(quit)
Enable pdp on interface
Command
Q(quit)
memory info
pdp State information
pdp neighor information
pdp statistics
memory info
pdp State information
pdp neighor information
pdp statistics
Show detailed information
Model Name
Show the traffic of CDP packet transmitted or received by
router
Show all the neighbor detected by CDP
- 45 -
Function