D-Link DI-1750 Reference Manual page 318

(01)group-list
(02)source-list
(03)<cr>
Please Input the code of command to be excute(0-3): 1
input 1，Select group-list option ，prompt is as below:
(00)WORD
Please Input the code of command to be excute(0-0): 0
Select 0 option ，then input access-list1，prompt is as below:
(00)<0-4294967>
(01)source-list
(02)<cr>
Please Input the code of command to be excute(0-2): 1
input 1，Select source-list option ，prompt is as below:
(00)WORD
Please Input the code of command to be excute(0-0): 0
Select 0 option ，then input access-list2，prompt:
(00)<0-4294967>
(01)<cr>
Please Input the code of command to be excute(0-1):
Select option ，configure flow parameter .
Similarly you can configure output stream of a multicast flow to be n kbps:
ip multicast
group-list access-list1 source-list
access-list2 kbps
7.3.10 Configure IP multicast Helper
Use command ip multicast helper-map to configure connecting two broadcast network with multicast
route in multicast network. Use ip（undo） multicast helper-map to cancel this command.
On the first hop router connected with source broadcast network:
Command
interface type number
ip multicast
broadcast
access-list
ip directed-broadcast
ip forward-protocol [port]
Step1：
input interface Command，prompt is as below:
(00)FastEthernet
(01)Ethernet
......
Please Input the code of command to be excute(0-10):
Select port type，prompt is as below:
Please input a interface name:
input port name.
Step2：
In the parameter prompt select 17 option ，prompt is as below:
IP Multicast Address
Broadcast Address
IP Standard Access List Name
Rate in kilobits per second
Broadcast Address
IP Standard Access List Name
Rate in kilobits per second
Command
rate-limit out
Enter into port configuration.
Configure command ip multicast helper and
helper-map
translate broadcast messages into multicast
group-address
messages.
Enable directed broadcast.
Configure the port number allowing forwording
messages.
FastEthernet interface
Ethernet interface
Model Name
Purpose
Configure the maximum multicast flow limit in a
range on the port.
Purpose
- 316 -