D-Link DI-1750 Reference Manual page 435

(07)description Set the interface description
(08)dialer Dial-on-demand routing (DDR) commands
(09)dialer-group Assign interface to dialer-list
......
Please Input the code of command to be excute(0-28): 8（select command dialer）
Key Word:
U(undo) D(default) Q(quit)
(00)called Dialer called string
(01)caller Dialer caller string
(02)dtr Set DTR dialing for interface
(03)enable-timeout Set time interval between line down and dialing
(04)fast-idle Set idle time when line contention
(05)hold-queue Set output hold queue length
(06)idle-timeout Set idle time before disconnecting line
(07)map Define multiple dial-on-demand numbers
(08)priority Set interface priority in dialer rotary group
(09)rotary-group Add this interface to a dialer rotary group
(10)string Set default telephone number
(11)wait-for-carrier-time Set the router wait for carrier time
Please Input the code of command to be excute(0-11):9 （select rotory-group）
Input 9，select rotary-group
Key Word:
Q(quit)
(00)Dialer Dialer interface
Please Input the code of command to be excute(0-0): 0
Input 0，select Dialer
Please input a interface name:d3
note：input dialer interface name here,for example d3
Will you excute it? (Y/N):y
The physical interface in the dialer rotary group will use the ip address of the dialer interface.
10.5 Customize the DDR Network
10.5.1 Set Line-Idle Time
To specify the amount of time a line will stay idle before it is disconnected by DDR.
Set the line-idle time: dialer idle-timeout seconds
[DEFAULT@router /config/]#interface
Key Word:
U(undo) D(default) Q(quit)
(00)FastEthernet FastEthernet interface
(01)Ethernet Ethernet interface
(02)Serial Serial interface
(03)Async Asynchronous interface
(04)Null Null interface
(05)Loopback Loopback interface
(06)Tunnel Tunnel interface
(07)Dialer Dialer interface
(08)Multilink Multilink-group interface
(09)Virtual-template Virtual template interface
(10)Virtual-tunnel Virtual tunnel interface
Please Input the code of command to be excute(0-10): 2 （select serial interface）
Please input a interface name:s2/0
Will you excute it? (Y/N):y
Key Word:
Model Name
- 433 -