D-Link DI-1750 Reference Manual page 329

If necessary, clew continually the following related key word option.
7.4.7 Clear PIM-SM mrouting information
To clear the mrouting information of PIM-SM, use this command.
clear ip
group-address ] [source-address]
Input clear on management mode, clew:
(00)arp-cache
......
(03)ip
......
Please Input the code of command to be excute(0-46): 3
Key Word;
(00)beigrp
......
(05)mroute
......
Please Input the code of command to be excute(0-29):5
Key Word;
(00)dvmrp
......
(03)pim-sm
Please Input the code of command to be excute(0-3):3
If necessary, clew continually the following related key word option.
7.4.8 The example of PIM-SM configuration
The following example show the simple configuration of two routers which running PIM-SM.
ROUTE_A:
!
ip multicast-routing
!
interface Loopback0
ip address 192.166.100.142 255.255.255.0
ip pim-sm
!
interface Ethernet1/1
ip address 192.166.1.142 255.255.255.0
ip pim-sm
ip pim-sm dr-priority 100
!
interface Serial2/0
ip address 192.168.21.142 255.255.255.0
physical-layer speed 128000
ip pim-sm
!
router rip
network 192.168.21.0
network 192.166.1.0
network 192.166.100.0
version 2
!
Command
[
mroute pim-sm *
Clear the entire ARP cache
IP
......
Delete multicast routing table entries
......
PIM Sparse Mode
Model Name
Function
Clear PIM-SM mrouting information.
|
- 327 -