D-Link DI-1750 Reference Manual page 112

Please Input the code of command to be excute(0-18): u
Key Word:
U(undo) D(default)
(00)access-group
(01)address
......
Please Input the code of command to be excute(0-18): 1
Key Word:
Q(quit)
(00)A.B.C.D
(01)negotiated
(02)<cr>
Please Input the code of command to be excute(0-2): 2
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(08)dsr-ignore
(09)encapsulation
......
Please Input the code of command to be excute(0-25): 9
Key Word:
U(undo) D(default)
(00)ppp
(01)<cr>
Please Input the code of command to be excute(0-1): 0
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(19)ip
(20)line
......
Please Input the code of command to be excute(0-35): 20
Key Word:
U(undo) D(default)
(00)dial
(01)leased
Please Input the code of command to be excute(0-1): 0
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(11)dialer
(12)dialer-group
......
Please Input the code of command to be excute(0-38): 11
Key Word:
U(undo) D(default)
......
(08)priority
(09)rotary-group
......
Please Input the code of command to be excute(0-11): 9
Key Word:
Q(quit)
(00)Dialer
Please Input the code of command to be excute(0-0): 0
Please input a interface name:d1 （input Dialer interface）
Model Name
Q(quit)
Specify access control for packets
IP address
IP address
IP address negotiated over PPP or via DHCP
ignore dsr signal
Set encapsulation type for an interface
Q(quit)
PPP Protocol
IP configuration commands
Configure dialing mode
Q(quit)
Set dial-line
Set leased-line
Dial-on-demand routing (DDR) commands
Assign interface to dialer-list
Q(quit)
Set interface priority in dialer rotary group
Add this interface to a dialer rotary group
Dialer interface
- 110 -