Section 3 - Configuration
The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devices on your local network or remote LAN.
Click the Enabled radio button to enable the router RIP
function.
Select RIP Version and Operation mode from the drop-down
list.
Check Enabled box and click Save Settings to apply your
settings.
To disable RIP, click Disabled radio button and click Save
Settings.
The interface which RIP function is applied.
Interface:
RIP has two versions available: RIP 1 and
Version:
RIP 2. RIP 1 uses classed routing table and
RIP 2 uses classless routing table.
Two operation modes are available: Active
Operation:
and Passive.
Active mode: Router listens and shares
routing table with other devices.
Passive mode: Router only listens and
updates its own routing tables.
D-Link DSL-2740B User Manual
RIP
51