Table of Contents
Advertisement
(01)bgp
Please Input the code of command to be excute(0-1): 1
input 1，Select bgp option ，prompt is as below:
(00)<1-255>
Please Input the code of command to be excute(0-0): 0
input 0，prompt is as below:
Please input a digital number:Please input a string:
input external-distance value ，prompt is as below:
(00)<1-255>
Please Input the code of command to be excute(0-0): 0
input 0，prompt is as below:
Please input a digital number:Please input a string:
input internal-distance value ，prompt is as below:
(00)<1-255>
Please Input the code of command to be excute(0-0): 0
input 0，prompt is as below:
Please input a digital number:Please input a string:
input local-distance value .
Changing the administrative distance of BGP routes is considered dangerous and generally is not
recommended. The external distance should be lower than any other dynamic routing protocol, and the
internal and local distances should be higher than any other dynamic routing protocol.
6.12.21 Adjust BGP Timers
To adjust BGP timer keepalive and holdtime of a specified neighbor, perform the following task in
router configuration mode:
config-neighbor [ip-address | peer group-name]
set-timers keepalive holdtime
In the prompt Select 12 option ，prompt is as below:
(00)A.B.C.D
Please Input the code of command to be excute(0-0): 0
input 0，Select A.B.C.D option ，then prompt 为：
Please input a IP Address:
input IP ，prompt is as below:
(00)default-originate
......
(15)timers
......
Please Input the code of command to be excute(0-17): 15
input 15,Select timers option ，prompt is as below:
(00)<0-65535>
Please Input the code of command to be excute(0-0): 0
input 0，prompt is as below:
Please input a digital number:Please input a string:
input keepalive value ，prompt is as below:
(00)<0-65535>
Please Input the code of command to be excute(0-0): 0
input 0，prompt is as below:
Please input a digital number:Please input a string:
input holdtime value
Use neighbor (defsault) timers command to revert BGP timer of a neighbor or peer group to be
default value.
Distance of BGP routes
Distance for routes external to the AS
Distance for routes internal to the AS
Distance for local routes
Command
IP address of neighbor
Permit announcement of default route to neighbor
Configure BGP timers
Keepalive interval
Holdtime
Model Name
Adjust BGP timer keepalive and holdtime
of a specified peer unit or group. (Count in
second)
- 266 -
Purpose
Hide quick links:
Advertisement
Table of Contents
