D-Link DI-1750 Reference Manual page 373

Please Input the code of command to be excute(0-1): 0
Key Word:
Q(quit)
(00)dynamic
(01)<cr>
Please Input the code of command to be excute(0-1): 1
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(10)interface
(11)match
......
Please Input the code of command to be excute(0-19): 11
Key Word:
U(undo) D(default)
(00)address
Please Input the code of command to be excute(0-0): 0
Key Word:
Q(quit)
(00)WORD
Please Input the code of command to be excute(0-0): 0
Please input a string:list1 （Input Access-list name）
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(16)set
(17)show
......
Please Input the code of command to be excute(0-19): 16
Key Word:
U(undo) D(default)
(00)peer
(01)pfs
......
Please Input the code of command to be excute(0-3): 0
Key Word:
Q(quit)
(00)A.B.C.D
Please Input the code of command to be excute(0-0): 0
Please input a IP Address:10.0.0.2 （input peer ip address）
Will you excute it? (Y/N):y
Key Word:
Q(quit)
......
(15)router
(16)set
......
Please Input the code of command to be excute(0-19): 16
Key Word:
U(undo) D(default)
......
(02)security-association
(03)transform-set
Please Input the code of command to be excute(0-3): 3
Key Word:
Q(quit)
Model Name
Enable dynamic crypto map support
interface configuration
Match values
Q(quit)
Match address of packets to encrypt.
Access-list name
Set values for encryption/decryption
show configuration and status
Q(quit)
Allowed Encryption/Decryption peer.
Specify pfs settings
IP address of peer
routing protocol configuration
Set values for encryption/decryption
Q(quit)
Security association parameters
Specify list of transform sets
- 371 -