D-Link DI-1750 Reference Manual page 405

(19)job Job parameters and statistics
(20)l2tp L2TP information
(21)line TTY line information
(22)llc LLC2 parameters and statistics
(23)logging Show the contents of logging buffers
(24)memory memory info
(25)pdp pdp State information
(26)policy-map show policy-map configuration
(27)ppp PPP parameters and statistics
(28)queue show queue contents
--More--
28
Input 28 ，select queue option
Key Word:
Q(quit)
(00)FastEthernet
(01)Ethernet
(02)Serial
(03)Async
Please Input the code of command to be excute(0-3): 1
Note：Input interface info here, 1 is only for example
Please input a interface name:f0/0
Note：Input interface info here, f0/0is only for example
Will you excute it? (Y/N):y
The screen will display：
priority-list 2
Output queues: (queue :size/max/drops):
high: 0/50/0 middle: 0/24/0 normal: 0/1/0 low: 0/1/0
3. Display the priority list configuration
In command to display the priority queueing configuration, you can use the command below:
Command
show queueing priority
[DEFAULT@Router /config/]#show
Key Word:
U(undo) D(default) Q(quit)
(00)alias alias for command
(01)arp ARP table
(02)backup
(03)board-info Board information
(04)break router breakpoint information
(05)
(06)class-map show class-map configuration
(07)configuration show configuration in flash memory
(08)controller Interface controller status
(09)cpu cpu usage information
(10)debug State of each debugging option
(11)dhcp DHCP information
(12)dialer Dialer parameters and statistics
(13)frame-relay Display Frame Relay state
(14)frswitch Display Frame Relay switch state
(15)hdlc HDLC parameters and statistics
(16)hosts Host table
(17)interface interface status and configuration
(18)ip IP information
FastEthernet interface
Ethernet interface
Serial interface
Asynchronous interface
Display the priority queueing configuration.
Bakup status
Model Name
Purpose
- 403 -