multilink-group group-number
The input order is:
[DEFAULT@Router /config/]#interface
(00)FastEthernet
(01)Serial
......
Please Input the code of command to be excute(0-9): 1
Please input a interface name:s0/1 (input the interface name)
Will you excute it? (Y/N):y
Key Word:
U(undo)
D(default)
......
(19)ip
(20)mtu
......
Please Input the code of command to be excute(0-32): 19
Key Word:
U(undo)
D(default)
(00)access-group Specify access control for packets
......
Please Input the code of command to be excute(0-18): u
(00)access-group
(01)address
......
Please Input the code of command to be excute(0-18): 1
(00)A.B.C.D
(01)negotiated
(02)<cr>
Please Input the code of command to be excute(0-2): 2
Will you excute it? (Y/N):y
Key Word:
U(undo)
D(default)
......
(12)encapsulation
(13)english
......
Please Input the code of command to be excute(0-32): 12
Key Word:
U(undo)
D(default)
(00)frame-relay
(01)hdlc
(02)ppp
(03)sdlc
(04)x25
Please Input the code of command to be excute(0-4): 2
Will you excute it? (Y/N):y
Key Word:
U(undo)
D(default)
......
(21)mtu
(22)multilink-group
......
Please Input the code of command to be excute(0-35): 22
Key Word:
U(undo)
D(default)
(00)<0-32767>
Please Input the code of command to be excute(0-0): 0
Model Name
Add the interface to multilink group.
FastEthernet interface
Serial interface
Q(quit)
IP configuration commands
Set the interface MTU
Q(quit)
Specify access control for packets
IP address
IP address
IP address negotiated over PPP or via DHCP
Q(quit)
Set encapsulation type for an interface
help message in English
Q(quit)
Frame Relay Protocol
HDLC Protocol
PPP Protocol
SDLC Protocol
X.25 Protocol
Q(quit)
Set the interface MTU
Put interface in a multilink bundle
Q(quit)
Multilink group number
- 123 -