D-Link DI-1750 Reference Manual page 90

The specifications are given below:
1、clear SVC
[DEFAULT@Router /enable/]#clear
......
(10)telnet
(11)x25
Please Input the code of command to be excute(0-11): 11
(00)Serial
Please Input the code of command to be excute(0-0): 00
Please input a interface name:s0/1 （input interface name）
(00)<1-16>
Please Input the code of command to be excute(0-0): 00
Please input a digital number:Please input a string:5 （input the SVC number ）
Will you excute it? (Y/N):y
2、Display the operation statistic of interfaces
[DEFAULT@Router /enable/]#show
......
(16)hosts
(17)interface
......
Please Input the code of command to be excute(0-45): 17
(00)FastEthernet
(01)Serial
(02)Async
Please Input the code of command to be excute(0-2):01
Please input a interface name:s0/1 （input interface name）
Will you excute it? (Y/N):y
3、show the address mapping of an X.25 interface
[DEFAULT@Router /config/]#show
Key Word:
U(undo) D(default)
......
(47)vpdn
(48)x25
......
Please Input the code of command to be excute(0-50): 48
Key Word:
Q(quit)
(00)tcp
(01)vc
(02)xot
Please Input the code of command to be excute(0-2): 1
Key Word:
Q(quit)
(00)<cr>
Please Input the code of command to be excute(0-0): 0
Will you excute it? (Y/N):y
4、Display the X.25 switching table
[DEFAULT@Router /enable/]#show
......
(43)x25
(44)x25switch
(45)x29
Please Input the code of command to be excute(0-45): 44
Will you excute it? (Y/N):y
Model Name
Clear incoming telnet connection
Clear X.25 circuits
Serial interface
SVC number need to clear
Host table
interface status and configuration
FastEthernet interface
Serial interface
Asynchronous interface
Q(quit)
vpdn group
Display X.25 state
Show X25-TCP State
Display X.25 state
Show XOT State
Display X.25 state
Show X.25 switch route table
Show X.29d X3 pad parameters
- 88 -