D-Link DI-1750 Reference Manual page 218

Note:here you can Select according to you demands ，in indicats applying access list to inbound
routes, out indicats applying access list to outbound routs. Here select in is only an example..
Key Word:
Q(quit)
(00)WORD Name of access-list
Please Input the code of command to be excute(0-0): 0
input 0，Select WORD option .
Please input a string:name
Note:here input the access list name，name is only an example..
Key Word:
Q(quit)
(00)<0-2147483647> -- offset
Please Input the code of command to be excute(0-0): 0
Please input a string:23
input an offset，23 is only an example.
Will you excute it? (Y/N):y
6.10.7 Disabling Route Automatic Summarization
BEIGRP Route Auto-summary differs from other dynamic routing protocols and it obeys rules below:
When a BEIGRP process defines multiple networks, summary route of a network will be created as
long as the network has a subnet in BEIGRP topology-list.
The created summary route will point to interface Null0 and have the minimal metric in all subnets of the
network having summary route. Summary route will also be inserted into main IP routing table and its
management metric is 5 (non-configured).
When the router transmitting update to a neighbor of different IP network, subnets in rule 1 and rule 2
will be canceled and only summary route will be transmited.
Subnet in any network not listed in definition of BEIGRP process won't be summed up.
In some cases you may want to inform every particular route to neighbors, here you can use command
below:
(undo) auto-summary
In the directory of configuring beigrp route Select U(undo),
Key Word:
Q(quit)
(00)auto-summary Config automatic network number summarization
(01)beigrp config beigrp
...
Please Input the code of command to be excute(0-21): 0
Will you excute it? (Y/N):y
6.10.8 Customize Route Summary
When route auto-summary can't meet the requirement, you can configure route summary on every
interface of processing BEIGRP and appoint the objective network of processing summary. Interface
configured with summary won't send any particular updating information belonging to subnets in this
summary network segment, and other interfaces won't be affected.
Here the summary opration will obey rules below:
After an interface is configured with summary, summary route of a network will be created as soon as
this network has at least one subnet in BEIGRP topology list.
Command
Model Name
Function
Disables route automatic summarization.
- 216 -