D-Link DI-1750 Reference Manual page 407

5. Display The Policy-map Configuration
In command to display the policy-map configuration, you can use the command below:
Command
show
[policy-name]
To display your policy map configuration, you can use: show policy-map command in the global
configuration directory.
[DEFAULT@Router /config/]#show
Key Word:
U(undo) D(default) Q(quit)
(00)alias alias for command
(01)arp ARP table
(02)backup
(03)board-info Board information
(04)break router breakpoint information
(05)
(06)class-map show class-map configuration
(07)configuration show configuration in flash memory
(08)controller Interface controller status
(09)cpu cpu usage information
(10)debug State of each debugging option
(11)dhcp DHCP information
(12)dialer Dialer parameters and statistics
(13)frame-relay Display Frame Relay state
(14)frswitch Display Frame Relay switch state
(15)hdlc HDLC parameters and statistics
(16)hosts Host table
(17)interface interface status and configuration
(18)ip IP information
(19)job Job parameters and statistics
(20)l2tp L2TP information
(21)line TTY line information
(22)llc LLC2 parameters and statistics
(23)logging Show the contents of logging buffers
(24)memory memory info
(25)pdp pdp State information
(26)policy-map show policy-map configuration
--More--
26
Input 26 ，select policy-map option
Key Word:
Q(quit)
(00)WORD policy-map name
Please Input the code of command to be excute(0-0):0
Input 0，select WORD option：
Please input a string:name
Note：Input policy map names here, name is only for example.
Will you excute it? (Y/N):y
The screen displays the policy map configuration like the following lines:
Policy-Map name
9.2.12 QoS Configuration Project
If you have four types application A, B, C and D, the desired bandwidth ratio is 10:20:40:30, the packet
size is 1428:582:371:1525. When the system serves a queue, it will send integral times bytes of the
Display the policy-map configuration.
policy-map
Bakup status
Model Name
Purpose
- 405 -