D-Link DI-1750 Reference Manual page 294

6.15.4 Create route-map
To create route-map，following the step bellow:
route-map pbr
match ip address access-list
match length min_length max_length
set ip [default] next-hop A.B.C.D
set [default] interface interface_name
Step 1: Enter route-map configurtion
Input route-map on the global configuration mode ,clew:
Key Word:
U(undo) Q(quit)
(00)WORD
Please Input the code of command to be execute(0-0): 00
Please input a string:pbr
Key Word:
Q(quit)
(00)<1-65535>
(01)deny
(02)permit
(03)<cr>
Please Input the code of command to be execute(0-3): 03
Will you execute it? [Y]:y
Step 2: configure matching policy
Current Status:route_map
Key Word:
(05)match
Please Input the code of command to be execute(0-11): 05
Current Status:route_map
Key Word:
(02)ip
Current Status:route_map
Key Word:
Q(quit)
(00)A.B.C.D
Please Input the code of command to be execute(0-0): 00
Please input an IP Address Parameter:
Key Word:
Q(quit)
(00)address
(01)next-hop
Please Input the code of command to be execute(0-1):01
Current Status:route_map
Key Word:
Q(quit)
(00)A.B.C.D
Please Input the code of command to be execute(0-0): 00
Please input an IP Address Parameter:
Now, input access-list.
Or
Current Status:route_map
Command
Name of route-map
Route-map sequence number
Route-map denies operations
Route-map permits operations
Current Directory: config
Match rules for routes
Current Directory: config
Match ip attribute
Current Directory: config
IP address
Match ip address
Match next-hop address
Current Directory: config
IP address
Current Directory: config
Model Name
Function
Enter route-map configuration.
Configure matching policy.
Configure matching policy.
Set gateway.
Set outgoing interface.
- 292 -