D-Link DI-1750 Reference Manual page 448

U(undo) D(default) Q(quit)
(00)delay Delays before backup line up or down transitions
(01)interface Configure an interface as a backup
(02)load Load thresholds for line up or down transitions
(03)always Second interface always Up when primary interface down(dialer)
Please Input the code of command to be excute(0-3): 1
Input 1，select interface：
Key Word:
Q(quit)
(00)Serial Serial interface
(01)Async Asynchronous interface
Please Input the code of command to be excute(0-1): 0
Note：Input backup interface here,for example Serial.
Please input a interface name:s2/0
Note：Input interface name here,for example s2/0.
Will you excute it? (Y/N):y
Launch flow equilibrium on the interface.execute the following command under interface configuration.
backup load {enable-threshold | never }
{disable-threshold | never}
Key Word:
Q(quit)
(00)arp set arp timeout
(01)backup Modify backup parameters
(02)bandwidth Set the interface bandwidth
......
Please Input the code of command to be excute(0-35): 1 (select backup)
Key Word:
U(undo) D(default) Q(quit)
(00)delay Delays before backup line up or down transitions
(01)interface Configure an interface as a backup
(02)load Load thresholds for line up or down transitions
(03)always Second interface always Up when primary interface down(dialer)
Please Input the code of command to be excute(0-3): 2
Input 2，select load：
Key Word:
Q(quit)
(00)<0-100> Activate Percentage
(01)never Never activate the backup line
Please Input the code of command to be excute(0-1): 0
Note：Determine whether activating backup interface threshold is needed or not here,for example 0.
Please input a digital number:Please input a string:23
Note：If choosing activate threshold,input threshold here,for example 23.
Key Word:
Q(quit)
(00)<0-100> Deactive Percentage
(01)never Never dectivate the backup line
Please Input the code of command to be excute(0-1): 0
Note：Determine whether disactivating backup interface threshold is needed or not here,for example 0.
Please input a digital number:Please input a string:12
Note：If choosing disactivate threshold,input threshold here,for example 12.
Model Name
Command
- 446 -
Function
activate or disactivate backup interface threshold through
configuring interface backup flow