D-Link DI-1750 Reference Manual page 87

x25switch
x.121-address
[source interface]
1. Configuring a PVC XOT interface addressing
[DEFAULT@Router /config/]#x25switch
Key Word:
U(undo)
(00)connect
(01)destination
(02)xot
Please Input the code of command to be excute(0-2): 2
Key Word:
Q(quit)
(00)pvc
(01)svc
Please Input the code of command to be excute(0-1): 0
Key Word:
Q(quit)
(00)Async
(01)Serial
Please Input the code of command to be excute(0-1): 1
Please input a interface name:s1/0 （input interface name）
Key Word:
Q(quit)
(00)<1-15>
Please Input the code of command to be excute(0-0): 0
Please input a string:15 （input pvc number）
Key Word:
Q(quit)
(00)Async
(01)Serial
Please Input the code of command to be excute(0-1): 1
Please input a interface name:s2/0
Key Word:
Q(quit)
(00)<1-15>
Please Input the code of command to be excute(0-0): 0
Please input a string:15
Key Word:
Q(quit)
(00)A.B.C.D
Please Input the code of command to be excute(0-0): 0
Please input a ip address:10.0.0.1 （input the remote ip address）
Key Word:
Q(quit)
(00)source
(01)<cr>
Please Input the code of command to be excute(0-1): 1
Will you excute it? (Y/N):y
2. Configuring a SVC XOT interface addressing
[DEFAULT@Router /config/]#x25switch
Key Word:
U(undo) D(default)
(00)connect
(undo) xot svc
remote-ip-address
D(default) Q(quit)
Add/delete a PVC route in X.25 switch table
Add/delete a SVC route in X.25 switch table
Configure X25 over TCP route in X.25 switch table
Add/delete a PVC route based on XOT in X.25 switch table
Add/delete a SVC(xot) route in X.25 switch table
async interface
serial interface
Local PVC number
async interface
serial interface
Local PVC number
romote ip address
source interface
Q(quit)
Add/delete a PVC route in X.25 switch table
Model Name
Set a SVC XOT interface addressing
- 85 -