D-Link DI-1750 Reference Manual page 56

(00)buckets
(01)interval
(02)owner
(03)<CR>
Please Input the code of command to be excute(0-3): 0
Key Word:
Q(quit)
(00)<1-65535>
Please Input the code of command to be excute(0-0): 0
Please input a string:500 （input buckets of intervals）
Key Word:
Q(quit)
(00)interval
(01)owner
(02)<CR>
Please Input the code of command to be excute(0-2): 0
Key Word:
Q(quit)
(00)<1-3600>
Please Input the code of command to be excute(0-0): 0
Please input a string:100 （input value of Interval）
Key Word:
Q(quit)
(00)owner
(01)<CR>
Please Input the code of command to be excute(0-2): 0
Key Word:
Q(quit)
(00)WORD
Please Input the code of command to be excute(0-0): 0
Please input a string:dlink （input owner name）
Key Word:
Q(quit)
(00)<CR>
Please Input the code of command to be excute(0-0): 0
Will you excute it? (Y/N):y
After being added a history table, the device will get a collection from the designated interface every
second seconds and add the result as an item to the Ethernet history record table. When the command
"rmon collection history index" is used many times to configure an item with the same index, only the
parameters of last time is available; you can use the command "no rmon history index" to delete the
history item whose index is index. Note that it will occupy system resources if the bucket-number is too
large or the interval second is two small.
4.4.5 Display the RMON configuration
You can use the command "show" to display the RMON configuration of the router:
Command
show rmon
[statistics] [history]
Requested buckets of intervals. Default is 50 buckets
Interval to sample data for each bucket. Default is 1800 seconds
Set the owner of this RMON collection
Requested buckets of intervals
Interval to sample data for each bucket. Default is 1800 seconds
Set the owner of this RMON collection
Interval in seconds to sample data for each bucket
Set the owner of this RMON collection
RMON collection owner
[alarm] [event] Display the configurative information of RMON
alarm means that it will show the alarm items
event means that it will show the event items and items
included in the log table which is created because of the event
being induced.
statistics means that it will show the statistic items and
the statistics acquired from the interface.
history means that it will show the history items and the
statistics acquired from the interface during some given time
Model Name
Function
- 54 -