D-Link DI-1750 Reference Manual page 184

6.4.7 Configure DHCP Parameters
According to your demands, you can adjust the parameters used in DHCP interacting. Perform the
following commands in global configure directory:
Command
ip dhcp
seconds
ip dhcp client retransmit
count
ip dhcp client select seconds
Take the first command for an example.：
input ip Command，prompt is as below:
(00)access-list
......
(03)dhcp
......
Please Input the code of command to be excute(0-20): 3
input 3，Selectdhcp option ，prompt is as below:
(00)client
Please Input the code of command to be excute(0-0): 0
input 0，Selectclient option ，prompt is as below:
(00)minlease
(01)retransmit
(02)select
Please Input the code of command to be excute(0-2): 0
input 0，Select minlease option ，prompt is as below:
(00)<60-86400>
Please Input the code of command to be excute(0-2): 0
input 0，prompt is as below:
Please input a digital number:Please input a string:
input seconds value.
When processing "Obtain an IP for an Ethernet Interface", commands upward are optional.
6.4.8 Obtain an IP from DHCP-Server for PPP Interaction
About example of this scheme, please refer to concerned section "PPP Configure".
6.4.9 Monitor DHCP
You can examine some information about DHCP-Server (including manual specification) currently
found by the router. Perform the following command in management directory:
Command
show dhcp server
You can examine some information about IP address currently used by the router. Perform the following
command in management directory:
Command
show dhcp lease
input show Command，prompt is as below:
(00)access-list
Specify the minimum lease time allowed.
client minlease
Specify the retransmitting times of a protocol message.
Specify the interval time of SELECT.
Named access-list
Configure DHCP parameters
Configure DHCP Client parameters
Minimal acceptable lease time(seconds)
Configure packet retransmit count
SELECT interval
seconds (default 60)
Display information about DHCP Server known by the router.
Display information about IP resource used by the router.
Named access-list
Model Name
Function
Function
Function
- 182 -