Function:source - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

33
Obsolete and Discontinued Commands

:FUNCtion:SOURce

Command Syntax
:FUNCtion:SOURce <value>
<value> ::= {CHANnel<n> | ADD | SUBTract | MULTiply}
<n> ::= 1 to (# analog channels) in NR1 format
The :FUNCtion:SOURce command is only used when an FFT (Fast Fourier
Transform) operation is selected (see the:FUNCtion:OPERation command
for more information about selecting an operation). The :FUNCtion:SOURce
command selects the source for function operations. Choose CHANnel<n>,
or ADD, SUBT, or MULT to specify the desired source for FFT operations
specified by the :FUNCtion:OPERation command.
The :FUNCtion:SOURce command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :FUNCtion:SOURce1 command (see
Query Syntax
:FUNCtion:SOURce?
The :FUNCtion:SOURce? query returns the current source for function
operations.
Return Format
<value><NL>
<value> ::= {CHAN<n> | ADD | SUBT | MULT}
<n> ::= 1 to (# analog channels) in NR1 format
See Also •
•
718
(see page 790)
"Introduction to :FUNCtion Commands"
":FUNCtion:OPERation"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 278
on page 289
page 293) instead.