<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Version information
(Example)
When the controller type is "FZ4-XXX", the software version is "4.00", and the date is "Nov. 07, 2011"
<Command>
<Response>
Output Format (Non-procedure)
If the processing unit [Data Output] is set in a scene, measurement results are sequentially output
starting from the smallest data No. set in [Setting] of [Data Output].
Reference:
"Processing Item List Manual", "Data Output" (p.574)
When Outputting ASCII Data
Set the output format as "ASCII" in [Setting] of the [Data Output] processing item.
The factory settings default value is "ASCII".
Output format
FZ4 User's Manual
Type of controller
●
Software version
●
Controlling/Outputting through Serial Communication (Non-procedure)
7
519