Omron FZ4 Series User Manual page 359

folder, user name and password.
Set value
Setting item [Factory
default]
Share name S,T,U,V,W,X,Y,Z
Shared
-
folder
User name -
Password -
4.
Tap [OK].
5.
Tap [OK] on the network drive setting screen, and close the screen.
The setting is enabled after the controller is restarted.
FZ4 User's Manual
This is the name to be recognized by the controller as a network drive.
Only 1 unit can be connected.For FZ4-L35
, the shared name is displayed in the \Network folder.
For FZ4-11 /FZ4-H11
and H:, are displayed.
Specify the shared folder name.
Specify the name of the folder that has been created in advance on
the network drive. For example, if the host name is VISION and the
shared name is COMMON, specify a name such as
\\VISION\COMMON.
Enter the user name and the password to access the network drive.
If you are unclear about the user name or the password, contact the
device network administrator.
Setting the System Operation Environment
Description
/FZ4-6
, the drive letters, such as E:, F:, G:,
/FZ4-7
357
6