Omron FZ4 Series User Manual page 431

+4 0000
+5 0000
Saving all data
The system + scene group 0 data currently being used by the controller is saved to a file.
Command (PLC to controller)
Command
Command
area
code
top channel
+2 5000
+3 0070
―
+4
―
+5
Response (Controller to PLC)
Response
area
15-12
top channel
+2 0101
+3 0000
+4 0000
+5 0000
Screen capture
Captures the screen. The folder into which the captured image is saved depends on the system data
setting. Saves with the file name in the argument. If the file name extension is other than ".bmp", then
".bmp" is added to the file name.
Command (PLC to controller)
Command
Command
area
code
top channel
+2 6010
+3 0070
FZ4 User's Manual
0000 0000
0000 0000
Bit
15-12 11-8
0101 0000
0000 0000
0000 0000
0000 0000
Bit
11-8 7-4
0000 0000
0000 0111
0000 0000
0000 0000
Bit
15-12 11-8
0110 0000
0000 0000
Communicating through Serial Communication (PLC Link)
0000 Response code
Command execution result
OK: 0 (0000 0000)
0000
NG: -1 (FFFF FFFF)
7-4 3-0
0000 0000
0111 0000
0000 0000
0000 0000
3-0
0000
Command code
0000
Store response target command codes.
0000 Response code
Command execution result
OK: 0 (0000 0000)
0000
NG: -1 (FFFF FFFF)
7-4 3-0
0001 0000
0111 0000
Description
Sets command codes.
[Destination]
Up to 256 characters
Description
Description
Sets command codes.
429
7