Omron FZ4 Series User Manual page 547

Item Description
Measure
Continuous continuously
measurement during input of
commands.
Switch
Scene
measurement
switch
scenes.
Switch
Scene group
measurement
switch
scene groups.
Clear
measurement
Clearing
values.
Measurement
The OR signal
Values
and DO signal
are not cleared.
Clear error
output.
Clear Error The ERROR
indicator is also
cleared.
Clear Clear the OR
Parallel signal and DO
OR+DO signal.
0: OFF 1: ON
Reference
When the input command is not received correctly, the ERROR signal turns on.
●
Important
When parallel continuous measurement is engaged and continuous STEP signal is input, switching of scene
●
group should be avoided. When this is performed, set "Unchecked" in "Save scene group on switch scene" in
either of the settings items below.
Switch Scene Group window Reference:
●
[Measure setting] in the [Measure] menu Reference: Setting Conditions Related to Operation during Measurement (p.344)
●
Output Format
Each time measurement is performed, the measurement result is output.
Output can be selected to turn on either when the judgement result is OK or when it is NG. The factory
default setting is "ON at NG".
Reference: Setting Communication Specifications (Parallel Interface) (p.540)
FZ4 User's Manual
Input format (DI7 to DI0)
Execute Command
(DI7) (DI6, DI5)
1 00
1 01
1 11
1 10
1 10
1 10
Switching Scene Groups (p.65)
Controlling/Outputting through Parallel Communication
Command
Line No.
information
(DI4)
(DI3 to 0)
*****
The controller
does not see
this signal, so
a setting of
either 0 or 1
makes no
difference.
Input "Scene
No." in binary
format. (0 to
15)
Input "Scene
0 or 1
Group No." in
Specify the
binary format.
line number
(0 to 15)
to send
commands
to.
0000
0001
0010
Input example
Continuously measure
line 1
Input example:
10010000
Switch line 0 to Scene
2
Input example:
10100010
Switch line 1 to Scene
Group 2
Input example:
11110010
Clear the
measurement values
of line 1
Input
example:11010000
Clear the error of line
0
Input example:
11010001
Clear the OR signal
and DO signal of line 1
Input example:
11010010
545
7