Omron FZ4 Series User Manual page 453

(Example)
When data logging condition is set to "None".
<Command>
<Response>
Setting the data logging condition.
Sets the data logging condition for system data.
Sets the "Data logging condition" on the Logging Setting window .
<Command format>
or
(Response format)
When processing is performed normally
When processing is not performed normally
(Parameters explanation)
Data logging condition
(Example)
When setting the data logging condition to "All"
<Command>
FZ4 User's Manual
0: None
1: Only NG
2: All
Controlling/Outputting through Serial Communication (Non-procedure)
7
451