Omron FZ4 Series User Manual page 213

Example
Performs a batch input of the state of terminals such as the parallel I/Os
AA& = GetAll("ParallelIo")
Get global data
GetGlobalData <dataIdent>, <data>
Parameters
<dataIdent>
<data>
Return Value
None.
Description
Variable that stores acquired data is specified by the argument <data>(element of array variable is
available)
The acquired data is stored in the variable specified after it converts into the type of the specified
variable.
Example
Gets the value of global data "GsetData".
GetGlobalData "GsetData", gdata&
Gets processing unit image size
GetImageSize <unitNo>, <measureImageNo>, <sizeX>, <sizeY>
Parameters
<unitNo> Processing unit number (integer type)
<measureImageNo> Image number of image at the time of register for processing (integer type)
<sizeX> Obtained X size of the measured image (integer type)
<sizeY> Obtained Y size of the measured image (integer type)
Return Value
None.
FZ4 User's Manual
Data ident that is to be get
Data that is to be get
Using Custom Command
4
211