Omron FZ4 Series User Manual page 214

Description
Gets processing unit image size.
Example
Gets the size of the image of image number 0 of processing unit number 2.
GetImageSize 2, 0, sizeX&, sizeY&
Gets information about the Image Display window setting
4
GetImageWindow <windowNo>, <locationX>, <locationY>, <width>, <height>, <unitNo>, <subNo>,
<magnification>, <originX>, <originY>, <update>, <visible>
Parameters
<windowNo>
<locationX>
<locationY>
<width>
<height>
<unitNo>
<subNo>
<magnification>
<originX>
<originY>
<update>
<visible>
Return Value
None.
Description
Gets setting information about the Image Display Window.
Variable that store acquired data is specified by each argument (element of array variable is
available)Variable that stores acquired data is specified by the argument <data>(element of array
variable is available).
212 Using Custom Command
Window number (integer type)
Upper left X coordinate value of the window (integer type)
Upper left Y coordinate value of the window (integer type)
Window width (integer type)
Window height (integer type)
Processing unit number (integer type)
Sub number to be displayed (integer type)
Display magnification (Real number type)
Upper left X coordinate of a display image relative to the window upper left coordinate
(integer type)
Upper left Y coordinate of a display image relative to the window upper left coordinate
(integer type)
Update timing (integer type)
0: Every measurement
1: Only when an overall judgement result is NG at the time of measurement
2: Only when a target processing unit is NG at the time of measurement
3: Always updated (through display)
Display (integer type)
0: Window invisible
1: Window visible
FZ4 User's Manual