Omron FZ4 Series User Manual page 533

･ Command Area
Signal name
EXE
DSA
Command code
Command parameter 1
Command parameter 2
Command parameter 3
･ Response Area
Signal name
FLG
BUSY
OR
RUN
GATE
Command code
Response code
Response data
･ Output Area
Signal name
Output data 1
Output data 8
Accessing Communications Areas by Specifying I/O Memory Addresses
AT specifications can be set for variables to individually specify the I/O memory addresses that are
assigned in the communications areas.
1.
Setting Tag Sets (Network Configurator)
Specify the tag names in the PLC directly by using the I/O memory addresses that are assigned
in the communications areas. (Output tags are specified for the input connections to the Sensor
and input tags are specified for output connections to the PLC.)
Setting Examples
Output tag: D0
Input tag: D100
2.
Setting Variables (Sysmac Studio)
Define variables with AT specifications to the I/O memory addresses that are assigned in the
FZ4 User's Manual
EIPOutput.ControlFlag.F[0]
EIPOutput.ControlFlag.F[16]
EIPOutput.CommandCode
EIPOutput.CommandParam1
EIPOutput.CommandParam2
EIPOutput.CommandParam3
EIPInput.StatusFlag.F[0]
EIPInput.StatusFlag.F[1]
EIPInput.StatusFlag.F[3]
EIPInput.StatusFlag.F[4]
EIPInput.StatusFlag.F[16]
EIPInput.CommandCodeEcho
EIPInput.ResposeCode
EIPInput.ResposeData
EIPInput.OutputData[0]
・
・
・
EIPInput.OutputData[7]
Variable name
Variable name
Variable name
Control/Output through EtherNet/IP
7
531