Omron FZ4 Series User Manual page 328

Display image transfer size
(Size of the image to transfer)
4.
Press the [Start] button. Once a remote operation is established, the remotely operated window
is displayed on the controller.
4
Press the OK button on this window to terminate the remote operation from the controller.
The window on which the remote operation is disconnected is displayed on the remote operation
PC.
Differences from Local Operation and Limitation
There is no fundamental difference between local operation on the controller and a remote operation.
The remote operation PC windows, however, are not the windows of the controller themselves, and
thus, the following types of operational differences can be caused.
Major differences are listed as follows:
Functions to
be noted
Controller
restart
Operation
mode
Data file
reference
Screen
capture
Date-time
setting
Image display
326 Remotely Operating the Controller (Remote Operation)
Description
[Factory default]
4 to 640
[320]
Controller side
Automatically restart
All modes can be executed.
Directly reference the controller
folder.
The controller windows can be
captured.
The system date and time on the
controller are changed.
Displays the camera images and
figures, etc.
Setting value
This sets the size of the image to display
on the remote operation screen.
Description
Remote operation PC side
The controller automatically restarts, while the remote
operation PC waits to be shut down manually.
All modes, except for the single-line high-speed mode, can
be executed.
Reference the controller folder on the network drive.
The controller windows are captured (not the remote PC
windows).
The system date and time on the remote operation PC are
changed.
Displays the camera images and figures, etc. with low pixels.
Description
FZ4 User's Manual