[Low rotation (Ambient temperature: 0 to +45 ° C)]
●
High rotation (Ambient temperature: 0 to +50 ° C)
●
3.
Tap [OK].
Important
The fan control setting is disabled in the FZ4-L35
●
Setting the Start-up Status [Startup Setting]
The status for when power is turned on is set here.
Inspection can be set to start immediately after the power is turned on by setting the scene number of
the scene in which measurement contents are set.
In addition, settings can be done so that the Camera Setting window is not displayed during start-up.
1.
On the Main screen, tap the [System] menu - [Controller] - [Startup setting].
The Startup Setting window is displayed.
2.
Change the settings.
FZ4 User's Manual
Set value
[Factory default]
series.
Setting the System Operation Environment
Description
Select a fan rotation
speed.
347
6