Omron FZ4 Series User Manual page 508

When processing is not performed normally
<Parameters explanation>
Scene group
No.
File name of
scene group
data
Important
Do not turn off power to the controller until there is a response.
●
7
(Example)
When "LABEL.SGP" in the "IMG01" folder of the USB memory to which the drive name "USBDisk2" is
assigned is loaded to scene group 3
<Command>
<Response>
Note
For the USB memory drive, see Reference:
●
SGRSAVE
Saves scene group data.
<Command format>
<Response format>
When processing is performed normally
506 Controlling/Outputting through Serial Communication (Non-procedure)
Specifies the scene group No. to be read (0 to 31)
Specifies the name of the file to be read with a definite path (ex.: \USBDisk\abc.sgp, E:\abc.sgp).
Only files that are under the following systems and have an "SGP" extension can be read.
Load to
RAMDisk C:\Data\RAMDisk
USBDisk E:\,F:\,G:\,H:\
FZ4-1100 series
About USB Drive Names (p.330) .
FZ-L35 /600/700 series
\RAMDISK
\USBDisk to \USBDisk3
FZ4 User's Manual