Omron FZ4 Series User Manual page 532

7
2.
Defining the Variables
Define variables for the data links for the communications area data that is used in EtherNet/IP
communications.
These variables use the data types that were defined above in procedure 1.
Variable
EIPOutput
EIPInput
3.
Exporting the Variables That Were Defined on Sysmac Studio
Export the variables that you defined so that you can use them on the Network Configurator.
An exported CSV file is created.
4.
Network Configurator Settings
1.
2.
5.
Accessing the Communications Areas from the User Program
The defined variables are used to access the communications areas for the Sensor using the
following notation.
530 Control/Output through EtherNet/IP
・Assignment Example for Variable Data Type That Matches the Response and Output
Areas
Network
Variable type Publish
attribute
Global variable Output
Global variable Input
Import to the Network Configurator the CSV file that you exported from the Sysmac
Studio.
The variables that are imported will automatically be registered as tags.
Set the connections as shown in the following table.
Originator device (PLC) settings
Input tag set: EIPOutput
Output tag set: EIPInput
Data type Application
S_EIPOutput For data links to the command area
For data links to the response and
S_EIPInput
output areas
Target device (Sensor) settings
Output tag set: Input101
Input tag set: Output100
FZ4 User's Manual