Important
The remote recovery dialog box may be hidden behind a window in the non-stop adjustment mode and the
●
multi-line random trigger mode, both of which contain two windows. Press [CTL+TAB] to switch between the
windows.
If there is an error during a remote operation (for example, a camera connection error), the error dialog box is
●
displayed, not on the remote PC, but on the controller.
The remote operation communication will be disconnected if a network setting (such as the IP address, subnet
●
mask, and default gateway) on the controller is modified using the remote operation function. Restart FZ
Remote Operation Tool to establish the connection again. The connection may fail immediately after a network
setting has been changed. Please wait for a while before reconnecting.
FZ4 User's Manual
Remotely Operating the Controller (Remote Operation)
4
327