Omron FZ4 Series User Manual page 449

<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Specifies the name of the file to be read with a definite path (ex.: \USBDisk\abc.bkd, E:\abc.bkd).
Only files that are under the following systems and have a "BKD" extension can be read.
System +
scene group
Load to
data
RAMDisk
File name
USBDisk
Important
Do not turn off power to the controller until there is a response.
●
(Example)
When "LABEL1.BKD" in the "IMG01" folder of the USB memory to which the drive name "USBDisk2" is
assigned is loaded to the controller
<Command>
<Response>
BKDSAVE
The system + scene group 0 data currently being used by the controller is saved to a file.
<Command format>
<Response format>
When processing is performed normally
FZ4 User's Manual
FZ4-1100 series
C:\Data\RAMDisk
E:\,F:\,G:\,H:\
Controlling/Outputting through Serial Communication (Non-procedure)
FZ-L35 /600/700 series
\RAMDISK
\USBDisk to \USBDisk3
7
447