Changing Regions As A Batch [Shift Area] - Omron FZ4 Series User Manual

4.
Change the judgement conditions of each processing unit.
3
5.
Tap [OK].
The Judgement window closes, and the screen returns to the Main screen.
The changed contents are shown in the displayed scene.
When changing judgement conditions for multiple processing units, repeat steps
Reference:
6.
In the "Control" area of the Main screen, tap [Quit simplified non-stop adj.].
The simplified non-stop adjustment mode ends.
Note
If [Switch to ADJUST mode] is tapped while entering simplified non-stop adjustment, the simplified
●
non-stop adjustment mode is automatically ended and the screen switches to the ADJUST window.
Important
During simplified non-stop adjustment, do not switch the scene with scene switching or scene group switching.
●

Changing Regions as a Batch [Shift area]

Figure data for multiple processing items can be changed as a batch.
1.
Tap [Shift area] in the Edit Flow window.
The Move Measuring Area at Once window is displayed.
92 Useful Functions for Operation
3 (p.91) to Reference: 5 (p.92) .
FZ4 User's Manual