Omron FZ4 Series User Manual page 484

(Parameters explanation)
File name
(Example)
When saving the last input image to the file named "abc.ifz".
<Command>
7
<Response>
Note
When the extension is "ifz", the image is saved with the specified file name.
●
When the extension is anything other than "ifz", the image is saved with ".ifz" appended to the file name.
●
If there is no extension (only the folder name is given), the image is saved to a file named time stamp ".ifz".
●
LAYOUTNO or DLN
Getting the layout number
Gets the number of the currently displayed layout.
Important
For non-remote operation, only 0: Local can be specified. For remote operation, only 1: Remote can be
●
specified.
If this command is executed with any combination other than the above, it is not supported in Ver. 4.20.
Note that unexpected operations could occur.
<Command format>
or
(Response format)
When processing is performed normally
482 Controlling/Outputting through Serial Communication (Non-procedure)
Specify the save destination and file name for saving with the absolute path (Examples:
C:\Data\RAMDisk\abc.bmp, \RAMDISK\abc.bmp).
If you only give the folder name, then the "[time stamp].ifz" is automatically assigned as the file
name.
Save destination
RAMDisk C:\Data\RAMDisk
FZ4-1100 series FZ-L35 /600/700 series
\RAMDISK
FZ4 User's Manual