Omron FZ4 Series User Manual page 180

Get the arc tangent of the expression specified.
Output BUSY state
Change scene group number
Change scene number
Check a registration state of the processing unit
Gets the character corresponding to the character code.
Clear processing unit measure data
Clear the scene number
Clear the specified scene group
4
Closes the specified file
Continues the execution of a program halted by a stop
statement.
Copy the scene group data
Copy the scene data
Copy the processing unit figure data
Copy the processing unit model data
Copy the processing unit
Gets the cosine of the specified expression.
Gets the intersection between 2 straight lines.
Reads in the date from the internal clock
Sets the debugging mode.
Delete the processing unit
Definition of the array variables is carried out.
Gets image/text Display the processing unit number
The execution of the statements between Do and Loop
are repeated as long as the conditions continue to be
fulfilled.
Get the shortest distance between the specified line and
2 points.
Get the available space of the drive.
Checks for the end of file.
Free the array variable memory region that was defined
by the Dim command.
Gets the Error occurrence commands during exception
handling.
Gets the error class during exception handling.
Terminate the controller
Calculate exponential function.
Copies a file within the memory card.
Truncates everything after the radix point and gets the
integer value.
Repeats and executes the statements between the For
statement and the Next statement.
Input terminal all point input
Get global data
178 Using Custom Command
Atn (Function) Arithmetic calculation Reference: Detai l s (p.187)
BusyOut IO module control
ChangeSceneGroup Control scene group
ChangeScene Control scene
CheckUnit
Flow control
(Function)
Chr$ (Function) String operation
ClearMeasureData Measurement control Reference: Detai l s (p.190)
ClearScene Control scene
ClearSceneGroup Control scene group
Close File control
Cont Debug command
CopySceneGroup Control scene group
CopyScene Control scene
Control processing
CopyUnitFigure
unit
Control processing
CopyUnitModel
unit
CopyUnit Flow control
Cos (Function) Arithmetic calculation Reference: Detai l s (p.196)
Crspoint Arithmetic calculation Reference: Detai l s (p.196)
Date$ (Function) Others
Debug Debug command
DeleteUnit Flow control
Dim General instruction
DisplayUnitNo
Display control
(Function)
Do - Loop While General instruction
Dposline(Function) Arithmetic calculation Reference: Detai l s (p.201)
Dskf(Function) File control
Eof(Function) File control
Erase General instruction
Errcmnd$
General instruction
(Function)
Errno (Function) General instruction
ExitFzProcess Others
Exp(Function) Arithmetic calculation Reference: Detai l s (p.207)
Fcopy File control
Fix(Function) Arithmetic calculation Reference: Detai l s (p.208)
For...To...Step -
General instruction
Next
GetAll (Function) IO module control
GetGlobalData Control global data
Reference: Detai l s (p.188)
Reference: Detai l s (p.189)
Reference: Detai l s (p.188)
Reference: Detai l s (p.189)
Reference: Detai l s (p.190)
Reference: Detai l s (p.191)
Reference: Detai l s (p.191)
Reference: Detai l s (p.192)
Reference: Detai l s (p.192)
Reference: Detai l s (p.194)
Reference: Detai l s (p.193)
Reference: Detai l s (p.195)
Reference: Detai l s (p.195)
Reference: Detai l s (p.194)
Reference: Detai l s (p.197)
Reference: Detai l s (p.198)
Reference: Detai l s (p.199)
Reference: Detai l s (p.199)
Reference: Detai l s (p.200)
Reference: Detai l s (p.201)
Reference: Detai l s (p.202)
Reference: Detai l s (p.203)
Reference: Detai l s (p.203)
Reference: Detai l s (p.204)
Reference: Detai l s (p.205)
Reference: Detai l s (p.207)
Reference: Detai l s (p.208)
Reference: Detai l s (p.209)
Reference: Detai l s (p.210)
Reference: Detai l s (p.211)
FZ4 User's Manual